How to make sure that your electrical system is safe

It is a good idea to employ an experienced professional to examine your electrical safety equipment.

A certificate of electrical safety is a document that allows you to pinpoint and rectify any problems that may be present in your property prior to they cause injury or damage. The installation of electrical equipment is not required to be inspected independently until it has been removed, altered, or moved in any way , or if an authorization to work certificate is not granted.

For all other scenarios, the building regulations only require the inspection of equipment by competent persons. They don’t have to be electricians, but they must know what they are doing.

A typical electrical safety check includes testing the installation to verify that it conforms to all applicable building regulations, IEE Wiring Regulations, and the manufacturer’s specifications. Issues could include excessive electrical wires, sockets that are overloaded or equipment that is not working properly, which could cause fire.

The certificate also contains appliances that are attached to the installation, including heaters, immersion heaters, and kettles. They are therefore suitable for use.

An electrical inspection is carried out by a trained professional who can make suggestions as to how the issue might be addressed before they cause an opportunity for injury or destruction.

If you own a property that you lease, you may be entitled to request an electrical safety test under the conditions of your tenancy agreement.

Safety tips for electrical safety during home renovations

In addition to changing smoke detectors, experts at the university advise homeowners to adhere to the following guidelines when renovating:

1. If someone is using electricity from another area of the house Don’t pull the main switch, or isolated circuit breaker. This includes plugging appliances into outlets controlled by a wall switch.

2. Before beginning wiring begin, make sure you wait for the indicator light for power to stop when you turn off the circuit breaker.

3. If you do need to close the circuit breaker in isolation while an electrical device is that is connected to it. Turn off the electric power at the main switch before engaging with wires controlled the circuit breaker.

4. Be cautious when making use of an extension cord to provide electricity. Choose the shortest length you can and make sure that it’s not overloaded. If you’re using a longer cable, make sure it’s UL-approved for high-wattage appliances.

5. Be aware when working with wiring devices that are older especially three-way switches. These switches haven’t been used for many years. If they are not installed correctly they can be a risk of shock or electrocution.

6. Make sure to use only electrical fixtures that have been certified to be in compliance with Australian standards, such as those manufactured by Schneider Electric, Wylex or HPM.

7. Make sure your candles are free of combustible substances. Also, do not allow candles to go unattended.

8. Wear rubber-soled shoesand stand on dry ground and avoid using damaged extension cords. Don’t cut the cord of an old appliance , then plug it into another except if they’re of the same voltage rating.

If you want to learn more, click electrical safety certificate